Introducing V-Count II EL
Automobile accidents are the #1 killer of People. The vast majority of these accidents are the result of poor driving habits. Peer pressure, loud music, showing off, and general carelessness behind the wheel all contribute to these tragedies. Stop worrying about how your Drivers or teens Drive and get V-Count!
Talking about defensive driving skills, setting curfews and other limits certainly have their place. But what about when you're not there? This is when bad things happen to good Drivers.Based on statistics, over speeding is the number one cause of accidents involving inexperienced teenagers and even adult drivers. But, now you can set a speed limit and monitor how many times your teen exceeded that speed limit.
This is accomplished by supplying the unit with the same Vehicle Speed Signal (VSS) used by the vehicle speedometer. In older vehicles, year 1992 or earlier, that do not use an electronically driven speedometer, a special speed sensor installation kit is available.
The speed signal supplied to the V-COUNT II is processed by a microprocessor that compares it with a stored calibration value to determine the vehicle speed at any instant of time.
When the maximum speed limit set by the vehicle owner or fleet manager is violated, a loud warning tone is sounded. This warning tone remains on until the vehicle speed is reduced below the set maximum. The time in seconds of an Over Speed violation before a violation is logged can be set in the range of 1 to 20 seconds. The default setting is 5 seconds. A flashing red light will turn on if the speed violation lasts for longer than the set time. This Over Speed indicator light can only be extinguished by an authorized person entering the 6 digit Security Code.
Each violation that exceeds
the set Over Speed violation will cause a speed violation
counter to increment up to the maximum count of 99 for each instance of
violation.
If
the V-COUNT II is disconnected for more than 20 seconds and then
re-connected, a red flashing TAMPER light will start flashing.
The V-Count II-EL
(External Lights) model will indicate conditions of over
speeding and/or tampering by the external display of Blue
high intensity Light Emitting Diodes for use by speed
enforcement authorities. This speed control method is being
used by several countries such as Brunei, Singapore, Hong
Kong and Malaysia and is a requirement for large trucks,
buses, government and commercial vehicles.
Contact Omatrans Consults Nigeria on 08160293752 or send an email to omatransng@gmail.com for more details .
